NE

NETGEAR Router Default Passwords

Complete database of NETGEAR router login credentials and admin panel access

139 NETGEAR Models
157 Default Passwords
36 IP Addresses
5 Common Logins

About NETGEAR

NETGEAR is an American computer networking company that produces networking hardware for consumers, businesses, and service providers. Known for their Nighthawk gaming routers and Orbi mesh systems.

Founded: 1996
Headquarters: San Jose, California, USA
Default IP: 192.168.1.1

NETGEAR Router IP Addresses

IP addresses used by NETGEAR routers for admin panel access

NETGEAR Router Models & Default Passwords

Complete list of 139 NETGEAR router models with login credentials

Showing 25 of 139 models
Model Username Password IP Addresses
MR-108Nnonenone192.168.0.1
MR-314admin1234192.168.1.1
MR314admin1234192.168.1.1
MR3202Aadminpassword192.168.0.1
MR814adminpassword192.168.1.1
N4100adminadmin192.168.0.1
R36adminadmin192.168.1.1
RG-A100Ladminadmin192.168.2.1
RG60SEadminhsparouter192.168.1.1
RM356none1234192.168.1.1
RM5-Tiadminpassword192.168.1.1
RN243R4adminadmin192.168.1.254
ROUTER/MODEMadminbarricade192.168.1.1
RP114admin1234192.168.1.1+1
RP614adminnone192.168.1.1+1
RT-ACRH13adminnone192.168.88.1
RT-CNL-WL-N-SW4adminnone192.168.88.1
RT-N101234none192.168.0.1
RT-N13adminnone192.168.1.1
RT-N14Unonepassword192.168.1.1
RT314adminadmin192.168.1.1
TD-W8960Nnetscreennetscreen192.168.1.1
TEW-452BRPadmin''randomly generated''192.168.1.254
W150Dadminadmin192.168.254.254
W150NRadminadmin192.168.1.1

How to Login to Your NETGEAR Router

1

Connect to Your Network

Connect your device to your NETGEAR router via Wi-Fi or Ethernet cable.

2

Open Login Page

Open a browser and go to routerlogin.net or http://192.168.1.1

3

Enter Credentials

Use the default username/password from the table above for your specific model.

4

Configure Settings

Change Wi-Fi password, set up security features, and customize your network.

NETGEAR Router Configuration Guide

Accessing Your NETGEAR Admin Panel

To access your NETGEAR router settings, you need to connect to your local network and open the router's web interface. Most NETGEAR routers use the IP address 192.168.1.1 or the hostname routerlogin.net.

๐Ÿ’ก Pro Tip

If you can't access your router, try clearing your browser cache or using an incognito window. Also ensure you're connected directly to the NETGEAR router, not through a secondary network.

Common NETGEAR Settings to Configure

  • ๐Ÿ”’ Change Admin Password: Always change the default password for security
  • ๐Ÿ“ถ WiFi Name (SSID): Customize your network name
  • ๐Ÿ”‘ WiFi Password: Set a strong WPA3/WPA2 password
  • ๐Ÿ‘จโ€๐Ÿ‘ฉโ€๐Ÿ‘งโ€๐Ÿ‘ฆ Parental Controls: Block websites and set time limits
  • ๐ŸŽฎ QoS Settings: Prioritize gaming or streaming traffic
  • ๐Ÿ”„ Firmware Update: Keep your router secure with latest updates

Troubleshooting NETGEAR Login Issues

โš ๏ธ Can't Access 192.168.1.1?

  • Check connection: Make sure you're connected to your NETGEAR network
  • Try hostname: Use routerlogin.net instead of the IP
  • Check IP: Run ipconfig (Windows) or ip route (Linux) to find your gateway
  • Factory reset: Press and hold the RESET button for 10-15 seconds

Finding Your NETGEAR Router Model

Your NETGEAR router model number is usually printed on a sticker on the bottom or back of the device. It typically starts with letters like "R", "N", "AC", or the series name followed by numbers.

Example: NETGEAR MR-108N

NETGEAR Router FAQ

What is the default password for NETGEAR routers?

The most common default password for NETGEAR routers is password with username admin. However, different models may have different defaults. Check our table above for your specific model.

How do I reset my NETGEAR router to factory settings?

Locate the small RESET button (usually a pinhole) on the back or bottom of your NETGEAR router. Use a paperclip to press and hold for 10-15 seconds until the lights flash. The router will reboot with factory default settings.

What IP address does NETGEAR use?

NETGEAR routers primarily use 192.168.1.1 as the default gateway. Some models may use 192.168.0.1, 192.168.0.100, 192.168.1.254, depending on the configuration.

How do I change my NETGEAR WiFi password?

1) Login to routerlogin.net or 192.168.1.1. 2) Navigate to Wireless Settings or WiFi Security. 3) Find the password/passphrase field. 4) Enter your new password (minimum 8 characters). 5) Save and reconnect your devices.

My NETGEAR login is not working. What should I do?

First, verify you're on the correct network. Try both the IP address and hostname. Clear your browser cache or try incognito mode. If the default credentials don't work, the password may have been changed. You can factory reset the router to restore defaults.

How do I update NETGEAR router firmware?

Login to your router admin panel, navigate to Administration or Advanced Settings, find Firmware Update or Router Update. Some NETGEAR routers can check for updates automatically, or you can download the latest firmware from the NETGEAR support website.

Can't Find Your NETGEAR Model?

Search our complete database of 3,396+ router passwords

Search All Routers
โ†‘