US

USRobotics Router Default Passwords

Complete database of USRobotics router login credentials and admin panel access

9 USRobotics Models
9 Default Passwords
6 IP Addresses
4 Common Logins

USRobotics Router IP Addresses

IP addresses used by USRobotics routers for admin panel access

192.168.2.1 3 models 192.168.123.254 2 models 192.168.0.100 1 models 192.168.1.1 1 models 192.168.1.201 1 models 192.168.100.1 1 models

USRobotics Router Models & Default Passwords

Complete list of 9 USRobotics router models with login credentials

🔍
Showing 9 of 9 models
Model Username Password IP Addresses
VigorAPnonenone192.168.1.201
VigorFlynonenone192.168.0.100
Vikingnonenone192.168.2.1
VisionNetnoneadmin192.168.2.1
VK-100RTgnonenone192.168.2.1
VMG4380-B10Acablemodemrobotics192.168.100.1
VoCorenonenone192.168.123.254
VOPWRTnonenone192.168.123.254
Voyageradminadmin192.168.1.1

How to Login to Your USRobotics Router

1

Connect to Your Network

Connect your device to your USRobotics router via Wi-Fi or Ethernet cable.

2

Open Login Page

Open a browser and go to 192.168.1.1 or http://192.168.2.1

3

Enter Credentials

Use the default username/password from the table above for your specific model.

4

Configure Settings

Change Wi-Fi password, set up security features, and customize your network.

USRobotics Router Configuration Guide

Accessing Your USRobotics Admin Panel

To access your USRobotics router settings, you need to connect to your local network and open the router's web interface. Most USRobotics routers use the IP address 192.168.2.1 or the hostname 192.168.1.1.

💡 Pro Tip

If you can't access your router, try clearing your browser cache or using an incognito window. Also ensure you're connected directly to the USRobotics router, not through a secondary network.

Common USRobotics Settings to Configure

  • 🔒 Change Admin Password: Always change the default password for security
  • 📶 WiFi Name (SSID): Customize your network name
  • 🔑 WiFi Password: Set a strong WPA3/WPA2 password
  • 👨‍👩‍👧‍👦 Parental Controls: Block websites and set time limits
  • 🎮 QoS Settings: Prioritize gaming or streaming traffic
  • 🔄 Firmware Update: Keep your router secure with latest updates

Troubleshooting USRobotics Login Issues

⚠️ Can't Access 192.168.2.1?

  • Check connection: Make sure you're connected to your USRobotics network
  • Try hostname: Use 192.168.1.1 instead of the IP
  • Check IP: Run ipconfig (Windows) or ip route (Linux) to find your gateway
  • Factory reset: Press and hold the RESET button for 10-15 seconds

Finding Your USRobotics Router Model

Your USRobotics router model number is usually printed on a sticker on the bottom or back of the device. It typically starts with letters like "R", "N", "AC", or the series name followed by numbers.

Example: USRobotics VigorAP

USRobotics Router FAQ

What is the default password for USRobotics routers?

The most common default password for USRobotics routers is none with username none. However, different models may have different defaults. Check our table above for your specific model.

How do I reset my USRobotics router to factory settings?

Locate the small RESET button (usually a pinhole) on the back or bottom of your USRobotics router. Use a paperclip to press and hold for 10-15 seconds until the lights flash. The router will reboot with factory default settings.

What IP address does USRobotics use?

USRobotics routers primarily use 192.168.2.1 as the default gateway. Some models may use 192.168.123.254, 192.168.0.100, 192.168.1.1, depending on the configuration.

How do I change my USRobotics WiFi password?

1) Login to 192.168.1.1 or 192.168.2.1. 2) Navigate to Wireless Settings or WiFi Security. 3) Find the password/passphrase field. 4) Enter your new password (minimum 8 characters). 5) Save and reconnect your devices.

My USRobotics login is not working. What should I do?

First, verify you're on the correct network. Try both the IP address and hostname. Clear your browser cache or try incognito mode. If the default credentials don't work, the password may have been changed. You can factory reset the router to restore defaults.

How do I update USRobotics router firmware?

Login to your router admin panel, navigate to Administration or Advanced Settings, find Firmware Update or Router Update. Some USRobotics routers can check for updates automatically, or you can download the latest firmware from the USRobotics support website.

Other Router Brands

Explore default passwords for other popular router manufacturers

SHARP 1 models Ericsson 5 models INTERSHOP 1 models BROADLOGIC 1 models A1 Telekom 1 models INCHON 1 models LevelOne 37 models n 1 models
View All Brands

Can't Find Your USRobotics Model?

Search our complete database of 3,396+ router passwords

Search All Routers
↑