PA

Parrot Router Default Passwords

Complete database of Parrot router login credentials and admin panel access

1 Parrot Models
1 Default Passwords
1 IP Addresses
1 Common Logins

Parrot Router IP Addresses

IP addresses used by Parrot routers for admin panel access

Parrot Router Models & Default Passwords

Complete list of 1 Parrot router models with login credentials

Showing 1 of 1 models
Model Username Password IP Addresses
AR.Droneadminpassword192.168.168.168

How to Login to Your Parrot Router

1

Connect to Your Network

Connect your device to your Parrot router via Wi-Fi or Ethernet cable.

2

Open Login Page

Open a browser and go to 192.168.1.1 or http://192.168.168.168

3

Enter Credentials

Use the default username/password from the table above for your specific model.

4

Configure Settings

Change Wi-Fi password, set up security features, and customize your network.

Parrot Router Configuration Guide

Accessing Your Parrot Admin Panel

To access your Parrot router settings, you need to connect to your local network and open the router's web interface. Most Parrot routers use the IP address 192.168.168.168 or the hostname 192.168.1.1.

๐Ÿ’ก Pro Tip

If you can't access your router, try clearing your browser cache or using an incognito window. Also ensure you're connected directly to the Parrot router, not through a secondary network.

Common Parrot Settings to Configure

  • ๐Ÿ”’ Change Admin Password: Always change the default password for security
  • ๐Ÿ“ถ WiFi Name (SSID): Customize your network name
  • ๐Ÿ”‘ WiFi Password: Set a strong WPA3/WPA2 password
  • ๐Ÿ‘จโ€๐Ÿ‘ฉโ€๐Ÿ‘งโ€๐Ÿ‘ฆ Parental Controls: Block websites and set time limits
  • ๐ŸŽฎ QoS Settings: Prioritize gaming or streaming traffic
  • ๐Ÿ”„ Firmware Update: Keep your router secure with latest updates

Troubleshooting Parrot Login Issues

โš ๏ธ Can't Access 192.168.168.168?

  • Check connection: Make sure you're connected to your Parrot network
  • Try hostname: Use 192.168.1.1 instead of the IP
  • Check IP: Run ipconfig (Windows) or ip route (Linux) to find your gateway
  • Factory reset: Press and hold the RESET button for 10-15 seconds

Finding Your Parrot Router Model

Your Parrot router model number is usually printed on a sticker on the bottom or back of the device. It typically starts with letters like "R", "N", "AC", or the series name followed by numbers.

Example: Parrot AR.Drone

Parrot Router FAQ

What is the default password for Parrot routers?

The most common default password for Parrot routers is password with username admin. However, different models may have different defaults. Check our table above for your specific model.

How do I reset my Parrot router to factory settings?

Locate the small RESET button (usually a pinhole) on the back or bottom of your Parrot router. Use a paperclip to press and hold for 10-15 seconds until the lights flash. The router will reboot with factory default settings.

What IP address does Parrot use?

Parrot routers primarily use 192.168.168.168 as the default gateway. Some models may use depending on the configuration.

How do I change my Parrot WiFi password?

1) Login to 192.168.1.1 or 192.168.168.168. 2) Navigate to Wireless Settings or WiFi Security. 3) Find the password/passphrase field. 4) Enter your new password (minimum 8 characters). 5) Save and reconnect your devices.

My Parrot login is not working. What should I do?

First, verify you're on the correct network. Try both the IP address and hostname. Clear your browser cache or try incognito mode. If the default credentials don't work, the password may have been changed. You can factory reset the router to restore defaults.

How do I update Parrot router firmware?

Login to your router admin panel, navigate to Administration or Advanced Settings, find Firmware Update or Router Update. Some Parrot routers can check for updates automatically, or you can download the latest firmware from the Parrot support website.

Can't Find Your Parrot Model?

Search our complete database of 3,396+ router passwords

Search All Routers
โ†‘