ME

MediaLink Router Default Passwords

Complete database of MediaLink router login credentials and admin panel access

3 MediaLink Models
3 Default Passwords
2 IP Addresses
2 Common Logins

MediaLink Router IP Addresses

IP addresses used by MediaLink routers for admin panel access

192.168.1.1 2 models 192.168.39.1 1 models

MediaLink Router Models & Default Passwords

Complete list of 3 MediaLink router models with login credentials

🔍
Showing 3 of 3 models
Model Username Password IP Addresses
N80adminadmin192.168.1.1
N8004Radminadmin192.168.1.1
NA8300adminpassword192.168.39.1

How to Login to Your MediaLink Router

1

Connect to Your Network

Connect your device to your MediaLink router via Wi-Fi or Ethernet cable.

2

Open Login Page

Open a browser and go to 192.168.1.1 or http://192.168.1.1

3

Enter Credentials

Use the default username/password from the table above for your specific model.

4

Configure Settings

Change Wi-Fi password, set up security features, and customize your network.

MediaLink Router Configuration Guide

Accessing Your MediaLink Admin Panel

To access your MediaLink router settings, you need to connect to your local network and open the router's web interface. Most MediaLink routers use the IP address 192.168.1.1 or the hostname 192.168.1.1.

💡 Pro Tip

If you can't access your router, try clearing your browser cache or using an incognito window. Also ensure you're connected directly to the MediaLink router, not through a secondary network.

Common MediaLink Settings to Configure

  • 🔒 Change Admin Password: Always change the default password for security
  • 📶 WiFi Name (SSID): Customize your network name
  • 🔑 WiFi Password: Set a strong WPA3/WPA2 password
  • 👨‍👩‍👧‍👦 Parental Controls: Block websites and set time limits
  • 🎮 QoS Settings: Prioritize gaming or streaming traffic
  • 🔄 Firmware Update: Keep your router secure with latest updates

Troubleshooting MediaLink Login Issues

⚠️ Can't Access 192.168.1.1?

  • Check connection: Make sure you're connected to your MediaLink network
  • Try hostname: Use 192.168.1.1 instead of the IP
  • Check IP: Run ipconfig (Windows) or ip route (Linux) to find your gateway
  • Factory reset: Press and hold the RESET button for 10-15 seconds

Finding Your MediaLink Router Model

Your MediaLink router model number is usually printed on a sticker on the bottom or back of the device. It typically starts with letters like "R", "N", "AC", or the series name followed by numbers.

Example: MediaLink N80

MediaLink Router FAQ

What is the default password for MediaLink routers?

The most common default password for MediaLink routers is admin with username admin. However, different models may have different defaults. Check our table above for your specific model.

How do I reset my MediaLink router to factory settings?

Locate the small RESET button (usually a pinhole) on the back or bottom of your MediaLink router. Use a paperclip to press and hold for 10-15 seconds until the lights flash. The router will reboot with factory default settings.

What IP address does MediaLink use?

MediaLink routers primarily use 192.168.1.1 as the default gateway. Some models may use 192.168.39.1, depending on the configuration.

How do I change my MediaLink WiFi password?

1) Login to 192.168.1.1 or 192.168.1.1. 2) Navigate to Wireless Settings or WiFi Security. 3) Find the password/passphrase field. 4) Enter your new password (minimum 8 characters). 5) Save and reconnect your devices.

My MediaLink login is not working. What should I do?

First, verify you're on the correct network. Try both the IP address and hostname. Clear your browser cache or try incognito mode. If the default credentials don't work, the password may have been changed. You can factory reset the router to restore defaults.

How do I update MediaLink router firmware?

Login to your router admin panel, navigate to Administration or Advanced Settings, find Firmware Update or Router Update. Some MediaLink routers can check for updates automatically, or you can download the latest firmware from the MediaLink support website.

Other Router Brands

Explore default passwords for other popular router manufacturers

NRG 1 models Pepwave 1 models SmartRG 4 models NIKSUN 1 models TiVo 1 models SITARA 1 models LG-Nortel 2 models Ubiquiti 3 models
View All Brands

Can't Find Your MediaLink Model?

Search our complete database of 3,396+ router passwords

Search All Routers
↑