KY

Kyocera Router Default Passwords

Complete database of Kyocera router login credentials and admin panel access

10 Kyocera Models
11 Default Passwords
6 IP Addresses
5 Common Logins

Kyocera Router IP Addresses

IP addresses used by Kyocera routers for admin panel access

192.168.1.1 5 models 192.168.178.1 2 models 192.168.0.1 1 models 192.168.1.103 1 models 192.168.1.69 1 models 192.168.123.254 1 models

Kyocera Router Models & Default Passwords

Complete list of 10 Kyocera router models with login credentials

🔍
Showing 10 of 10 models
Model Username Password IP Addresses
ECOLINKnonePASSWORD192.168.1.1
FS-1028MFP28002800192.168.1.69
FS-C8020MFPAdminAdmin192.168.1.103
GN-A16Bnonenone192.168.178.1
GN-AP01nonenone192.168.178.1
INTERMATEadminadmin192.168.1.1
KR1adminadmin192.168.1.1+1
m22-madmin1234192.168.1.1
MAP-1600nonenone192.168.0.1
TELNETrootroot192.168.1.1

How to Login to Your Kyocera Router

1

Connect to Your Network

Connect your device to your Kyocera router via Wi-Fi or Ethernet cable.

2

Open Login Page

Open a browser and go to 192.168.1.1 or http://192.168.1.1

3

Enter Credentials

Use the default username/password from the table above for your specific model.

4

Configure Settings

Change Wi-Fi password, set up security features, and customize your network.

Kyocera Router Configuration Guide

Accessing Your Kyocera Admin Panel

To access your Kyocera router settings, you need to connect to your local network and open the router's web interface. Most Kyocera routers use the IP address 192.168.1.1 or the hostname 192.168.1.1.

💡 Pro Tip

If you can't access your router, try clearing your browser cache or using an incognito window. Also ensure you're connected directly to the Kyocera router, not through a secondary network.

Common Kyocera Settings to Configure

  • 🔒 Change Admin Password: Always change the default password for security
  • 📶 WiFi Name (SSID): Customize your network name
  • 🔑 WiFi Password: Set a strong WPA3/WPA2 password
  • 👨‍👩‍👧‍👦 Parental Controls: Block websites and set time limits
  • 🎮 QoS Settings: Prioritize gaming or streaming traffic
  • 🔄 Firmware Update: Keep your router secure with latest updates

Troubleshooting Kyocera Login Issues

⚠️ Can't Access 192.168.1.1?

  • Check connection: Make sure you're connected to your Kyocera network
  • Try hostname: Use 192.168.1.1 instead of the IP
  • Check IP: Run ipconfig (Windows) or ip route (Linux) to find your gateway
  • Factory reset: Press and hold the RESET button for 10-15 seconds

Finding Your Kyocera Router Model

Your Kyocera router model number is usually printed on a sticker on the bottom or back of the device. It typically starts with letters like "R", "N", "AC", or the series name followed by numbers.

Example: Kyocera ECOLINK

Kyocera Router FAQ

What is the default password for Kyocera routers?

The most common default password for Kyocera routers is none with username none. However, different models may have different defaults. Check our table above for your specific model.

How do I reset my Kyocera router to factory settings?

Locate the small RESET button (usually a pinhole) on the back or bottom of your Kyocera router. Use a paperclip to press and hold for 10-15 seconds until the lights flash. The router will reboot with factory default settings.

What IP address does Kyocera use?

Kyocera routers primarily use 192.168.1.1 as the default gateway. Some models may use 192.168.178.1, 192.168.0.1, 192.168.1.103, depending on the configuration.

How do I change my Kyocera WiFi password?

1) Login to 192.168.1.1 or 192.168.1.1. 2) Navigate to Wireless Settings or WiFi Security. 3) Find the password/passphrase field. 4) Enter your new password (minimum 8 characters). 5) Save and reconnect your devices.

My Kyocera login is not working. What should I do?

First, verify you're on the correct network. Try both the IP address and hostname. Clear your browser cache or try incognito mode. If the default credentials don't work, the password may have been changed. You can factory reset the router to restore defaults.

How do I update Kyocera router firmware?

Login to your router admin panel, navigate to Administration or Advanced Settings, find Firmware Update or Router Update. Some Kyocera routers can check for updates automatically, or you can download the latest firmware from the Kyocera support website.

Other Router Brands

Explore default passwords for other popular router manufacturers

Manhattan 1 models SPHAIRON 1 models ALAXALA 1 models Embarq 1 models JDS 1 models ZTE 5 models CIPHERTRUST 1 models Telia 1 models
View All Brands

Can't Find Your Kyocera Model?

Search our complete database of 3,396+ router passwords

Search All Routers
↑