JU

Juniper Router Default Passwords

Complete database of Juniper router login credentials and admin panel access

7 Juniper Models
9 Default Passwords
4 IP Addresses
5 Common Logins

Juniper Router IP Addresses

IP addresses used by Juniper routers for admin panel access

192.168.1.1 2 models 192.168.1.254 2 models 192.168.168.1 2 models 192.168.254.254 2 models

Juniper Router Models & Default Passwords

Complete list of 7 Juniper router models with login credentials

🔍
Showing 7 of 7 models
Model Username Password IP Addresses
ISG2000netscreennetscreen192.168.1.1
NWA1123-ACnonepassword192.168.168.1
NWA1123-NInonepassword192.168.168.1
TD-W8900Gadminnone192.168.1.254
TD-W8901Gadminnone192.168.1.1+1
TD-W8920Gnonenone192.168.254.254
TD-W8951NDnoneadmin192.168.254.254

How to Login to Your Juniper Router

1

Connect to Your Network

Connect your device to your Juniper router via Wi-Fi or Ethernet cable.

2

Open Login Page

Open a browser and go to 192.168.1.1 or http://192.168.1.1

3

Enter Credentials

Use the default username/password from the table above for your specific model.

4

Configure Settings

Change Wi-Fi password, set up security features, and customize your network.

Juniper Router Configuration Guide

Accessing Your Juniper Admin Panel

To access your Juniper router settings, you need to connect to your local network and open the router's web interface. Most Juniper routers use the IP address 192.168.1.1 or the hostname 192.168.1.1.

💡 Pro Tip

If you can't access your router, try clearing your browser cache or using an incognito window. Also ensure you're connected directly to the Juniper router, not through a secondary network.

Common Juniper Settings to Configure

  • 🔒 Change Admin Password: Always change the default password for security
  • 📶 WiFi Name (SSID): Customize your network name
  • 🔑 WiFi Password: Set a strong WPA3/WPA2 password
  • 👨‍👩‍👧‍👦 Parental Controls: Block websites and set time limits
  • 🎮 QoS Settings: Prioritize gaming or streaming traffic
  • 🔄 Firmware Update: Keep your router secure with latest updates

Troubleshooting Juniper Login Issues

⚠️ Can't Access 192.168.1.1?

  • Check connection: Make sure you're connected to your Juniper network
  • Try hostname: Use 192.168.1.1 instead of the IP
  • Check IP: Run ipconfig (Windows) or ip route (Linux) to find your gateway
  • Factory reset: Press and hold the RESET button for 10-15 seconds

Finding Your Juniper Router Model

Your Juniper router model number is usually printed on a sticker on the bottom or back of the device. It typically starts with letters like "R", "N", "AC", or the series name followed by numbers.

Example: Juniper ISG2000

Juniper Router FAQ

What is the default password for Juniper routers?

The most common default password for Juniper routers is none with username admin. However, different models may have different defaults. Check our table above for your specific model.

How do I reset my Juniper router to factory settings?

Locate the small RESET button (usually a pinhole) on the back or bottom of your Juniper router. Use a paperclip to press and hold for 10-15 seconds until the lights flash. The router will reboot with factory default settings.

What IP address does Juniper use?

Juniper routers primarily use 192.168.1.1 as the default gateway. Some models may use 192.168.1.254, 192.168.168.1, 192.168.254.254, depending on the configuration.

How do I change my Juniper WiFi password?

1) Login to 192.168.1.1 or 192.168.1.1. 2) Navigate to Wireless Settings or WiFi Security. 3) Find the password/passphrase field. 4) Enter your new password (minimum 8 characters). 5) Save and reconnect your devices.

My Juniper login is not working. What should I do?

First, verify you're on the correct network. Try both the IP address and hostname. Clear your browser cache or try incognito mode. If the default credentials don't work, the password may have been changed. You can factory reset the router to restore defaults.

How do I update Juniper router firmware?

Login to your router admin panel, navigate to Administration or Advanced Settings, find Firmware Update or Router Update. Some Juniper routers can check for updates automatically, or you can download the latest firmware from the Juniper support website.

Other Router Brands

Explore default passwords for other popular router manufacturers

Ovislink 17 models A1 Telekom 1 models MediaLink 3 models Gigafast 1 models Kasda 4 models MEDION 1 models ANDOVER 1 models WANG 1 models
View All Brands

Can't Find Your Juniper Model?

Search our complete database of 3,396+ router passwords

Search All Routers
↑