BR

Browan Router Default Passwords

Complete database of Browan router login credentials and admin panel access

1 Browan Models
1 Default Passwords
1 IP Addresses
1 Common Logins

Browan Router IP Addresses

IP addresses used by Browan routers for admin panel access

Browan Router Models & Default Passwords

Complete list of 1 Browan router models with login credentials

Showing 1 of 1 models
Model Username Password IP Addresses
CDE530AMubntubnt192.168.1.20

How to Login to Your Browan Router

1

Connect to Your Network

Connect your device to your Browan router via Wi-Fi or Ethernet cable.

2

Open Login Page

Open a browser and go to 192.168.1.1 or http://192.168.1.20

3

Enter Credentials

Use the default username/password from the table above for your specific model.

4

Configure Settings

Change Wi-Fi password, set up security features, and customize your network.

Browan Router Configuration Guide

Accessing Your Browan Admin Panel

To access your Browan router settings, you need to connect to your local network and open the router's web interface. Most Browan routers use the IP address 192.168.1.20 or the hostname 192.168.1.1.

๐Ÿ’ก Pro Tip

If you can't access your router, try clearing your browser cache or using an incognito window. Also ensure you're connected directly to the Browan router, not through a secondary network.

Common Browan Settings to Configure

  • ๐Ÿ”’ Change Admin Password: Always change the default password for security
  • ๐Ÿ“ถ WiFi Name (SSID): Customize your network name
  • ๐Ÿ”‘ WiFi Password: Set a strong WPA3/WPA2 password
  • ๐Ÿ‘จโ€๐Ÿ‘ฉโ€๐Ÿ‘งโ€๐Ÿ‘ฆ Parental Controls: Block websites and set time limits
  • ๐ŸŽฎ QoS Settings: Prioritize gaming or streaming traffic
  • ๐Ÿ”„ Firmware Update: Keep your router secure with latest updates

Troubleshooting Browan Login Issues

โš ๏ธ Can't Access 192.168.1.20?

  • Check connection: Make sure you're connected to your Browan network
  • Try hostname: Use 192.168.1.1 instead of the IP
  • Check IP: Run ipconfig (Windows) or ip route (Linux) to find your gateway
  • Factory reset: Press and hold the RESET button for 10-15 seconds

Finding Your Browan Router Model

Your Browan router model number is usually printed on a sticker on the bottom or back of the device. It typically starts with letters like "R", "N", "AC", or the series name followed by numbers.

Example: Browan CDE530AM

Browan Router FAQ

What is the default password for Browan routers?

The most common default password for Browan routers is ubnt with username ubnt. However, different models may have different defaults. Check our table above for your specific model.

How do I reset my Browan router to factory settings?

Locate the small RESET button (usually a pinhole) on the back or bottom of your Browan router. Use a paperclip to press and hold for 10-15 seconds until the lights flash. The router will reboot with factory default settings.

What IP address does Browan use?

Browan routers primarily use 192.168.1.20 as the default gateway. Some models may use depending on the configuration.

How do I change my Browan WiFi password?

1) Login to 192.168.1.1 or 192.168.1.20. 2) Navigate to Wireless Settings or WiFi Security. 3) Find the password/passphrase field. 4) Enter your new password (minimum 8 characters). 5) Save and reconnect your devices.

My Browan login is not working. What should I do?

First, verify you're on the correct network. Try both the IP address and hostname. Clear your browser cache or try incognito mode. If the default credentials don't work, the password may have been changed. You can factory reset the router to restore defaults.

How do I update Browan router firmware?

Login to your router admin panel, navigate to Administration or Advanced Settings, find Firmware Update or Router Update. Some Browan routers can check for updates automatically, or you can download the latest firmware from the Browan support website.

Can't Find Your Browan Model?

Search our complete database of 3,396+ router passwords

Search All Routers
โ†‘