BC

BCM Router Default Passwords

Complete database of BCM router login credentials and admin panel access

1 BCM Models
1 Default Passwords
1 IP Addresses
1 Common Logins

BCM Router IP Addresses

IP addresses used by BCM routers for admin panel access

BCM Router Models & Default Passwords

Complete list of 1 BCM router models with login credentials

Showing 1 of 1 models
Model Username Password IP Addresses
CAS-200Wadminpassword192.168.1.1

How to Login to Your BCM Router

1

Connect to Your Network

Connect your device to your BCM router via Wi-Fi or Ethernet cable.

2

Open Login Page

Open a browser and go to 192.168.1.1 or http://192.168.1.1

3

Enter Credentials

Use the default username/password from the table above for your specific model.

4

Configure Settings

Change Wi-Fi password, set up security features, and customize your network.

BCM Router Configuration Guide

Accessing Your BCM Admin Panel

To access your BCM router settings, you need to connect to your local network and open the router's web interface. Most BCM routers use the IP address 192.168.1.1 or the hostname 192.168.1.1.

๐Ÿ’ก Pro Tip

If you can't access your router, try clearing your browser cache or using an incognito window. Also ensure you're connected directly to the BCM router, not through a secondary network.

Common BCM Settings to Configure

  • ๐Ÿ”’ Change Admin Password: Always change the default password for security
  • ๐Ÿ“ถ WiFi Name (SSID): Customize your network name
  • ๐Ÿ”‘ WiFi Password: Set a strong WPA3/WPA2 password
  • ๐Ÿ‘จโ€๐Ÿ‘ฉโ€๐Ÿ‘งโ€๐Ÿ‘ฆ Parental Controls: Block websites and set time limits
  • ๐ŸŽฎ QoS Settings: Prioritize gaming or streaming traffic
  • ๐Ÿ”„ Firmware Update: Keep your router secure with latest updates

Troubleshooting BCM Login Issues

โš ๏ธ Can't Access 192.168.1.1?

  • Check connection: Make sure you're connected to your BCM network
  • Try hostname: Use 192.168.1.1 instead of the IP
  • Check IP: Run ipconfig (Windows) or ip route (Linux) to find your gateway
  • Factory reset: Press and hold the RESET button for 10-15 seconds

Finding Your BCM Router Model

Your BCM router model number is usually printed on a sticker on the bottom or back of the device. It typically starts with letters like "R", "N", "AC", or the series name followed by numbers.

Example: BCM CAS-200W

BCM Router FAQ

What is the default password for BCM routers?

The most common default password for BCM routers is password with username admin. However, different models may have different defaults. Check our table above for your specific model.

How do I reset my BCM router to factory settings?

Locate the small RESET button (usually a pinhole) on the back or bottom of your BCM router. Use a paperclip to press and hold for 10-15 seconds until the lights flash. The router will reboot with factory default settings.

What IP address does BCM use?

BCM routers primarily use 192.168.1.1 as the default gateway. Some models may use depending on the configuration.

How do I change my BCM WiFi password?

1) Login to 192.168.1.1 or 192.168.1.1. 2) Navigate to Wireless Settings or WiFi Security. 3) Find the password/passphrase field. 4) Enter your new password (minimum 8 characters). 5) Save and reconnect your devices.

My BCM login is not working. What should I do?

First, verify you're on the correct network. Try both the IP address and hostname. Clear your browser cache or try incognito mode. If the default credentials don't work, the password may have been changed. You can factory reset the router to restore defaults.

How do I update BCM router firmware?

Login to your router admin panel, navigate to Administration or Advanced Settings, find Firmware Update or Router Update. Some BCM routers can check for updates automatically, or you can download the latest firmware from the BCM support website.

Can't Find Your BCM Model?

Search our complete database of 3,396+ router passwords

Search All Routers
โ†‘