AL

Alice Router Default Passwords

Complete database of Alice router login credentials and admin panel access

2 Alice Models
2 Default Passwords
2 IP Addresses
2 Common Logins

Alice Router IP Addresses

IP addresses used by Alice routers for admin panel access

Alice Router Models & Default Passwords

Complete list of 2 Alice router models with login credentials

Showing 2 of 2 models
Model Username Password IP Addresses
JHR-N825Radminadmin192.168.2.1
JHR-N845Radmin1234192.168.1.241

How to Login to Your Alice Router

1

Connect to Your Network

Connect your device to your Alice router via Wi-Fi or Ethernet cable.

2

Open Login Page

Open a browser and go to 192.168.1.1 or http://192.168.1.241

3

Enter Credentials

Use the default username/password from the table above for your specific model.

4

Configure Settings

Change Wi-Fi password, set up security features, and customize your network.

Alice Router Configuration Guide

Accessing Your Alice Admin Panel

To access your Alice router settings, you need to connect to your local network and open the router's web interface. Most Alice routers use the IP address 192.168.1.241 or the hostname 192.168.1.1.

๐Ÿ’ก Pro Tip

If you can't access your router, try clearing your browser cache or using an incognito window. Also ensure you're connected directly to the Alice router, not through a secondary network.

Common Alice Settings to Configure

  • ๐Ÿ”’ Change Admin Password: Always change the default password for security
  • ๐Ÿ“ถ WiFi Name (SSID): Customize your network name
  • ๐Ÿ”‘ WiFi Password: Set a strong WPA3/WPA2 password
  • ๐Ÿ‘จโ€๐Ÿ‘ฉโ€๐Ÿ‘งโ€๐Ÿ‘ฆ Parental Controls: Block websites and set time limits
  • ๐ŸŽฎ QoS Settings: Prioritize gaming or streaming traffic
  • ๐Ÿ”„ Firmware Update: Keep your router secure with latest updates

Troubleshooting Alice Login Issues

โš ๏ธ Can't Access 192.168.1.241?

  • Check connection: Make sure you're connected to your Alice network
  • Try hostname: Use 192.168.1.1 instead of the IP
  • Check IP: Run ipconfig (Windows) or ip route (Linux) to find your gateway
  • Factory reset: Press and hold the RESET button for 10-15 seconds

Finding Your Alice Router Model

Your Alice router model number is usually printed on a sticker on the bottom or back of the device. It typically starts with letters like "R", "N", "AC", or the series name followed by numbers.

Example: Alice JHR-N825R

Alice Router FAQ

What is the default password for Alice routers?

The most common default password for Alice routers is admin with username admin. However, different models may have different defaults. Check our table above for your specific model.

How do I reset my Alice router to factory settings?

Locate the small RESET button (usually a pinhole) on the back or bottom of your Alice router. Use a paperclip to press and hold for 10-15 seconds until the lights flash. The router will reboot with factory default settings.

What IP address does Alice use?

Alice routers primarily use 192.168.1.241 as the default gateway. Some models may use 192.168.2.1, depending on the configuration.

How do I change my Alice WiFi password?

1) Login to 192.168.1.1 or 192.168.1.241. 2) Navigate to Wireless Settings or WiFi Security. 3) Find the password/passphrase field. 4) Enter your new password (minimum 8 characters). 5) Save and reconnect your devices.

My Alice login is not working. What should I do?

First, verify you're on the correct network. Try both the IP address and hostname. Clear your browser cache or try incognito mode. If the default credentials don't work, the password may have been changed. You can factory reset the router to restore defaults.

How do I update Alice router firmware?

Login to your router admin panel, navigate to Administration or Advanced Settings, find Firmware Update or Router Update. Some Alice routers can check for updates automatically, or you can download the latest firmware from the Alice support website.

Can't Find Your Alice Model?

Search our complete database of 3,396+ router passwords

Search All Routers
โ†‘